0 item - $0.00

Memorias Kingston HyperX Fury DDR4 2666Mhz - 4x8= 32Gb

Memorias Kingston HyperX Fury

DDR4 2666Mhz - 4x8= 32GbImagen relacionada

55( 1 )

Kingston HyperX Fury DDR4 2666Mhz - 4x8= 32Gb



Imagen relacionada



32GB x 64-Bit

DDR4-2666Mhz CL15 288-Pin DIMM



HyperX HX424C15FB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15

SDRAM (Synchronous DRAM) 2Rx8, memory module, based on

sixteen 512M x 8-bit FBGA components per module. Each module

kit supports Intel® Extreme Memory Profiles (Intel® XMP)

2.0. Each module has been tested to run at DDR4-2666 at a low

latency timing of 15-15-15 at 1.2V. Additional timing parameters

are shown in the Plug-N-Play (PnP) Timing Parameters

section below. The JEDEC standard electrical and

mechanical specifications are as follows:


Row Cycle Time (tRCmin)

Refresh to Active/Refresh

Command Time (tRFCmin)

Row Active Time (tRASmin)

Maximum Operating Power

UL Rating

Operating Temperature

Storage Temperature

15 cycles





94 V - 0

0oC to +85oC

-55oC to +100oC


• JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V

DDR4-2133 CL14-14-14 @1.2V

•XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Dual-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• Height 1.340” (34.04mm), w/o heatsink

No hay comentarios escritos todavía.

Dar su consejo sobre este tema: