Memorias Kingston HyperX Fury DDR4 2666Mhz – 4×8= 32Gb

USD 330

Imagen relacionada

Categoría:

Resultado de imagen para Memorias Kingston HyperX Fury DDR4 2666Mhz"

Resultado de imagen para Memorias Kingston HyperX Fury DDR4 2666Mhz"

Resultado de imagen para Memorias Kingston HyperX Fury DDR4 2666Mhz"

Resultado de imagen para Memorias Kingston HyperX Fury DDR4 2666Mhz"

Resultado de imagen para Memorias Kingston HyperX Fury DDR4 2666Mhz"

 

DESCRIPTION

32GB – ( 4×8 )

DDR4-2666Mhz CL15 288-Pin DIMM

 

FEATURES

HyperX HX424C15FB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15

SDRAM (Synchronous DRAM) 2Rx8, memory module, based on

sixteen 512M x 8-bit FBGA components per module. Each module

kit supports Intel® Extreme Memory Profiles (Intel® XMP)

2.0. Each module has been tested to run at DDR4-2666 at a low

latency timing of 15-15-15 at 1.2V. Additional timing parameters

are shown in the Plug-N-Play (PnP) Timing Parameters

section below. The JEDEC standard electrical and

mechanical specifications are as follows:

CL(IDD)

Row Cycle Time (tRCmin)

Refresh to Active/Refresh

Command Time (tRFCmin)

Row Active Time (tRASmin)

Maximum Operating Power

UL Rating

Operating Temperature

Storage Temperature

15 cycles

46.75ns(min.)

260ns(min.)

29.125ns(min.)

TBD W*

94 V – 0

0oC to +85oC

-55oC to +100oC

JEDEC/XMP TIMING PARAMETERS

• JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V

DDR4-2133 CL14-14-14 @1.2V

•XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP – 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Dual-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• Height 1.340” (34.04mm), w/o heatsink